Enlighted Rings 21

Soldered metal rings, sheer black diffusing layer
RGB LED pixels, individually addressable
Custom control hardware and software
20" x 20" x 4" thick

Edition of 3

2024

This is part of the Enlighted Rings series of wall-mounted mixed-media art with embedded RGB LEDs. The outermost layer is made with several sizes of silver-colored metal circles and D-rings that have been soldered into a shallow convex dome shape. A fabric diffusing layer is mounted behind the rings, and RGB LED pixels are mounted on an additional internal layer, with one LED aligned with the center of each ring. Some diffused light is also visible through the negative space between rings.

The lights filling the circle are arranged with four-way (and sometimes eight-way) symmetry, and are animated with repeating color sequences that produce a variety of hypnotic patterns and optical illusions. In this edition of three pieces, the sheer overlay fabric is black. Enlighted Rings 22 has the same layout and programming, with a white sheer overlay.

When it is first powered up, the piece will run a repeating sequence that cycles between a list of 10 modes, half of which are sound-reactive. It can also be set to run a single pattern continuously, using the built-in mode switch on the back panel or with the Enlighted iOS BLE App.

video

The video below starts with a demonstration of some of the patterns in a quiet room (they are being changed remotely via my iOS App). The second part of the video shows some of the sound-reactive patterns responding to music.